Icom Multipin Plug I2
01 November 2015
Icom numbering
- Speaker Out.
- VCC. Power take off from radio battery via 47 ohms.
- Detect. When grounded signals radio to use external audio.
- Gnd. Common Ground.
- Reset.
- RXD. Receive Data.
- TXD. Transmit Data.
- Mic + Mic in. If using an Electret Mic this will need powering externally from VCC via 15K resistor.
- Ext PTT. PTT when grounded
If you would like to use this data on your own website then please include this link: Information sourced from Wildtalk.com.
Use this data at your own risk. Wildtalk accepts no liability for any accidents or losses caused by use of this data.
